Filter
Top Products
KMQxx001E–KOCJ0046 283
System Action: Processing continues, but no data will be collected for the
executing function.
User Response: Ensure that the command server is running on all queue
managers. Ensure that the channel initiator is running. Check queue manager
and channel initiator for error messages. Collect information for diagnosis.
KMQMQ242I QSG MONITOR DISABLED DUE TO ZERO QSGCHKINTERVAL
Explanation: A value of zero seconds for the QSGCHKINTERVAL was
specified on the PERFORM STARTMON command.
System Action: Processing continues, but all QSG monitoring will be disabled.
User Response: If QSG monitoring is not desired on this agent, no action is
necessary. To activate monitoring, the QSGCHKINTERVAL value must be
non-zero and the agent restarted.
KMQMQ243I QSG THREAD STARTED FOR XCF GROUP "groupname"
Explanation: The QSG monitoring thread has been started with the indicated
XCF group name.
System Action: This thread will watch for queue managers of interest that
could perform the QSG monitoring function. When one is found, the thread
determines whether to start monitoring by using the XCF serialization function.
User Response: None, this is an informational message. To completely disable
the thread, QSGCHKINTERVAL(0) may be specified on the PERFORM
STARTMON command.
KMQMQ244I QSG MONITOR ACTIVE FOR QSG(qsgname) AT QMGR(qmgr)
Explanation: QSG monitoring for the indicated queue-sharing group using the
indicated queue manager has been initiated.
System Action: Processing continues with the monitoring function active.
User Response: None, this is an informational message.
KMQMQ245I QSG MONITOR TAKEOVER FOR QSG(qsgname) AT QMGR(qmgr)
Explanation: QSG monitoring for the indicated queue-sharing group using the
indicated queue manager has been initiated in response to a takeover request.
System Action: Processing continues with the monitoring function active.
User Response: None, this is an informational message.
KMQMQ246I QSG MONITOR INACTIVE FOR QSG(qsgname) AT QMGR(qmgr)
Explanation: QSG monitoring for the indicated queue-sharing group using the
indicated queue manager has been terminated, probably in response to a request
for takeover by another agent.
System Action: Processing continues, if takeover has been requested the other
agent should start QSG monitoring from another queue manager.
User Response: If produced in response to a takeover or shutdown request, no
action is necessary. Otherwise, collect information for diagnosis.
KMQMQ247I QSG TAKEOVER INITIATED FOR QSG(qsgname) AT QMGR(qmgr)
Explanation: It was determined that QSG monitoring is already active from
another agent with MONITOR(YES) specified, but this agent has specified
MONITOR(TAKEOVER).