Filter
Top Products
26 Candle Products Messages Manual (KLVHS–KONCT)
KLVNA101 UNABLE TO ACCESS NAM DATABASE: DSNAME(dsname)
CNTRLPT(cntrlpt)
Explanation: The network access manager (NAM) was called to validate
security for a user. DB was specified as an option for the control point cntrlpt, but
the database associated with the control point could not be accessed.
System Action: Security validation fails and the user is logged off.
User Response: Check initialization library member KLVINNAM to verify that
the control point and database have been defined correctly.
Message Type: ALERT.
KLVNA102 USER NOT DEFINED: CNTRLPT(cntrlpt) USERID(userid) [GROUP(group])
[TERM(terminal)] [APPL(appl)]
Explanation: Security validation for the specified user failed when the network
access manager (NAM) was called. The supplied user ID is invalid. This message
can be generated if the address space is not APF-authorized. Fields of interest are
the control point name cntrlpt, the userid userid, the group group, the terminal
name terminal, and the application name appl. The control point name cntrlpt
may be in the form cntrlpt1-cntrlpt2, where cntrlpt1 refers to the control point
used and cntrlpt2 to the control point requested. The message is logged to create
an audit trail, but this can be overridden at start-up time.
System Action: This message is installation specific. The system action
depends on the configuration of NAM. If using NAM to do the validation, the
userid was not defined in the NAM database. If using a NAM exit, the external
security package was unable to locate the userid. This message will appear in
RKLVLOG and may be seen at the terminal if the external security package has
not passed a message back to NAM. If a message was passed back by the external
security package, that message will be seen.
User Response: If you are a user viewing this message on your screen, re-enter
a valid user ID. Verify that the address space is APF-authorized.
Message Type: INFO.
KLVNA103 PASSWORD NOT AUTHORIZED: CNTRLPT(cntrlpt) USERID(userid)
[GROUP(group]) [TERM(terminal)] [APPL(appl)]
Explanation: Security validation for the specified user failed when the network
access manager (NAM) was called. The password supplied is invalid for the
userid. Fields of interest are the control point name cntrlpt, the userid userid, the
group group, the terminal name terminal, and the application name appl. The
control point name cntrlpt may be in the form cntrlpt1-cntrlpt2, where cntrlpt1
refers to the control point used and cntrlpt2 to the control point requested. The
message is logged to create an audit trail, but this can be overridden at start-up
time.