Filter
Top Products
352 Candle Products Messages Manual (KLVHS–KONCT)
KN3CV112 REQUESTED PIU WAS NOT FOUND
Explanation: A VTAM Trace browse request was issued. The requested PIU was
not found.
System Action: None.
User Response: In most cases, there is nothing wrong. The message indicates
the browse request could not find the specified PIU.
You also receive this message if the browse request is not valid. For example: you
requested an invalid PIU number; you requested a find for a hexadecimal or
character string that does not exist; or you requested the search string PIU when a
search string was never specified in the trace definition.
Message Type: Warning.
KN3CV115 THE HISTORICAL GRAPH OPTIONS LOCATED ON THE ACTION BAR
OPTIONS PULLDOWN PANEL ARE NOT VALID. PLEASE UPDATE
HISTORICAL GRAPH OPTIONS BEFORE ATTEMPTING TO ACCESS
HISTORICAL GRAPHS.
Explanation: The user attempted to access historical graphs, but the historical
graphs options are not valid.
System Action: None.
User Response: Update the historical graph options from the action bar
options pulldown panel, then retry the operation.
Message Type: Information.
KN3CV116 AN UNEXPECTED ERROR OCCURRED
Explanation: When OMEGAMON II attempted to process a user request, an
unexpected error occurred.
System Action: None.
User Response: First check to see if the Tables Database ran out of space. If
that is not the problem, retry the operation. If the problem persists, look at
OMEGAMON II’s SYSOUT or message log, note the CT/Engine table services
return code, and report the problem to Candle Support Services.
Message Type: Internal error.
KN3CV117 VALID RANGE IS 20—300
Explanation: The sampling interval must be in the range of 20—300 seconds.
System Action: None.
User Response: Specify a value that is not less than 20 and not greater than
300.
Message Type: User input error.
KN3CV118 ENTER N, L, S, OR B
Explanation: The only acceptable characters to specify in this field are N
(None), L (Log), S (SMF), or B (Both).
System Action: None.
User Response: Specify an N for no recording, an L for Log File recording, an
S for SMF recording, or a B for both Log File and SMF recording.
Message Type: User input error.