Filter
Top Products
518 Candle Products Messages Manual (KLVHS–KONCT)
KONCT125 NAME=name STATUS=status HOST=host IPADDR=xxx.xxx.xxx.xxx
Explanation: One KONCT125 message per TCP/IP image follows message
KONCT124, where:
System Action: None.
User Response: None.
Message Type: Informational.
KONCT131 MIB BROWSER INITIALIZATION FAILED: RC(retcode)
Explanation: Initialization of the MIB browser task failed with the return code
indicated.
System Action: The MIB browser terminates.
User Response: Log the information for problem diagnosis and contact Candle
Customer Support.
Message Type: Internal error.
KONCT132 MIB BROWSER IS NOT ACTIVE RC=retcode MODULE(module)
Explanation: An attempt was made to use the MIB browser function of the
TCP/IP console, but the browser is not active.
System Action: The MIB browser function does not complete.
User Response: Examine the TLVLOG for messages KONCT131, KONCT050,
KONCT051, KONCT052, KONCT053, or KONCT009. If the messages indicate a
problem with SNMP, this may be a problem with the SNMP agent. Check the
status of the SNMP agent and examine the SNMP log for possible problems. A
restart of the SNMP agent and OMEGAMON may be necessary. If this fails to
resolve the problem, log the information for problem diagnosis and contact
Candle Customer Support.
Message Type: User or internal error.
KONCT201 KONCT201 module - UNABLE TO LOAD MODULE module
Explanation: TCP/IP component start-up was unable to load the specified
module.
System Action: The OMEGAMON II for VTAM TCP/IP component is
terminated.
User Response: Ensure that all installation and maintenance jobs ran correctly.
Then contact Candle Support Services.
Message Type: Probable installation error.
NAME TCP/IP procedure name.
STATUS Active, Terminating, Down, Stopped, or Stopping.
HOST TCP/IP host name.
IPADDR Host primary IP address.