Filter
Top Products
KMQxx001E–KOCJ0046 247
User Response: Depending on the reason, do one of the following:
For reasons 1, 6, 7, issue the corrected SET RMANAGER command.
For reasons 2 and 3, no response is necessary.
For reasons 4, 5, 8, and 9, contact Candle Customer Support.
For reason 10, reissue the DISPLAY SETTINGS command. This reason may
occur during the transition from one state to another.
KMQCI320I DISPLAY COMPLETE
Explanation: The DISPLAY Settings command was processed successfully.
System Action: None.
User Response: None. This is a confirmation.
KMQCI321I COMMAND NOT VALID BEFORE STARTUP HAS COMPLETED
Explanation: The specified KMQCMD command cannot be entered prior to
completion of initialization of CCC for MQSeries.
System Action: None.
User Response: None.
KMQCI322I event_queuein or event_queueout: QMGRQ
(queue_manager_event_queue): PERFMQ (performance_event_queue):
CHANNELQ (channel_event_queue)
Explanation: This message is issued in response to a Display Settings
command. It provides information about the names defined using the SET
EVENTQIN and SET EVENTQOUT commands.
System Action: None. This message is informational.
User Response: None.
KMQCI323I APPLICATION SET(applid_mask) IS ESTABLISHED WITH THE
FOLLOWING SPECIFICATIONS: TRANPGM(tranpgm_mask)
MGRNAME(queue_manager_name_mask) STATISTICS(level)
TRACE(level) TRACELIMIT(nnnnnnnn)
Explanation: This message is one of several possible messages given in
response to a KMQCMD DISPLAY SETTINGS command. It displays the
monitored CCC for MQSeries application sets.
System Action: None.
User Response: None.
KMQCI324I TRACELIMIT REMAINDER IS nnnnnnnn; nnnnnnnn TRACE RECORDS
WRITTEN FOR THIS SET
Explanation: This message is displayed in response to a KMQCMD DISPLAY
SETTINGS command. It follows the message KMQCI323I and displays the
number of trace entries remained to be written and the number of trace records
written for the application set described in the previous KMQCI323I message.
System Action: None. This message is informational only.
User Response: None.
KMQCI330I SET QSG COMMAND PROCESSED SUCCESSFULLY
Explanation: The control statement has been read and processed successfully.