Filter
Top Products
132 Candle Products Messages Manual (KLVHS–KONCT)
KLVVP416 PHYSICAL SESSION TIMEOUT: mm:ss
Explanation: A VPRINTD command was issued. This message reports the idle
time allowed for the physical printer named in the KLVVP400 message before the
session between it and the VPRINTER also named in the KLVVP400 message is
terminated.
System Action: None.
User Response: None.
Message Type: REPLY.
KLVVP417 PHYSICAL PRINTER OWNED:YES/NO
Explanation: A VPRINTD command was issued. This message reports whether
or not the VPRINTER named in the preceeding KLVVP400 message currently
owns the physical printer also named in the KLVVP400 message.
System Action: None.
User Response: None.
Message Type: REPLY.
KLVVP418 MAXLINE: ###
Explanation: A VPRINTD command was issued. This message reports the
MAXLINE for the VPRINTER named in the KLVVP400 message.
System Action: None.
User Response: None.
Message Type: REPLY.
KLVVP419 PHYSICAL SESSION ACTIVE: NO/YES, REQUEST(request)
Explanation: A VPRINTD command was issued. This message reports whether
or not the VPRINTER named in the preceeding KLVVP400 message is currently
servicing a request (request).
System Action: None.
User Response: None.
Message Type: REPLY.
KLVVP421 CHAINSIZE SPECIFIED: ###
Explanation: A VPRINTD command was issued. This message reports the
CHAINSIZ for the VPRINTER named in the KLVVP400 message. This message
will only be displayed if CHAINSIZ= was specified when the VPRINTER was
defined.
System Action: None.
User Response: None.
Message Type: REPLY.