Filter
Top Products
370 Candle Products Messages Manual (KLVHS–KONCT)
KN3CV227 command COMMAND FAILED
Explanation: An attempt to execute the indicated command failed.
System Action: None.
User Response: Review all TCP/IP configuration steps relating to TCP/IP
command authorization and security. Ensure that the OMEGAMON address
space has the proper security authorization to perform the indicated command.
Review the RKLVLOG for additional messages relating to the error. If the problem
persists, gather the preceding 30 minutes of RKLVLOG and contact Candle
Customer Support.
Message Type: Possible configuration error.
KN3CV228 HI PRIORITY CONNECTION NOT DEFINED
Explanation: An attempt was made to delete an undefined TCP/IP high-priority
connection.
System Action: None.
User Response: Verify the connection definition in the CT/Engine operator
table manager. Log onto the CT/Engine operator and browse the
OMVTAM.TCPIP.EXCPSHUN.TABLE to determine how the connection was
originally defined. Once the error has been identified, retry the delete request.
Message Type: User input error.
KN3FC000 KN3FCCMD COMMAND PROCESSING COMPLETE
Explanation: The feature control command, KN3FCCMD, completed
processing.
System Action: None.
User Response: None.
Message Type: Confirmation.
KN3FC001 KN3FCCMD COMMAND REQUEST FAILED ROUTINE=routine_name
REASON=reason_code RETURN=return_code
Explanation: An error was detected during feature control command
(KN3FCCMD) processing.
System Action: The command request fails.
User Response: Log the entire error message for problem diagnosis, and
contact Candle Support Services.
Message Type: Internal error.
KN3FC002 KN3FCCMD COMMAND SYNTAX ERROR COMMAND(command_name)
Explanation: A syntax error was detected while processing feature control
command (KN3FCCMD) arguments.
System Action: The command request fails.
User Response: Enter KN3FCCMD HELP to list supported arguments.
Re-enter the command specifying valid KN3FCCMD arguments.
Message Type: User input error.