Filter
Top Products
KMQxx001E–KOCJ0046 355
KN3CV130 VALID RANGE IS 128–255
Explanation: The SMF record number to be generated must be in the range
128–255.
System Action: None.
User Response: Specify a number that is not less than 128 and is not greater
than 255.
Message Type: User input error.
KN3CV131 VALID RANGE IS 1–500
Explanation: The maximum number of PIUs to be retained for one trace must
be in the range 1–500.
System Action: None.
User Response: Specify a number that is not less than 1 and is not greater than
500.
Message Type: User input error.
KN3CV132 ALPHANUMERIC FIELD REQUIRED
Explanation: The field must consist only of alphabetic and numeric characters,
and the first character must be alphabetic.
System Action: None.
User Response: Enter only alphabetic and numeric characters (A–Z, 0–9) and
start with an alphabetic character.
Message Type: User input error.
KN3CV133 VIEW COMMAND INVALID WHEN DISPLAYING DIRECTORY
Explanation: Since the VIEW command displays the Snapshot Directory, it is
invalid to enter the VIEW command while the Snapshot Directory is displayed.
System Action: None.
User Response: The Snapshot Directory displays all the snapshots you have
saved. Enter action code S (Show Snapshot) next to the snapshot you want to
view.
Message Type: User input error.
KN3CV134 ENTER N OR S
Explanation: The only acceptable characters to specify in this field are N or S.
System Action: None.
User Response: Specify an N for no response time trend recording or an S for
response time trend recording to SMF.
Message Type: User input error.
KN3CV135 VALID RANGE IS 1–99
Explanation: The response time definite response frequency must be in the
range 1–99.
System Action: None.
User Response: Specify a number that is not less than 1 and is not greater than
99.
Message Type: User input error.