Filter
Top Products
176 Candle Products Messages Manual (KLVHS–KONCT)
Note: If you are using any of the special characters in your connection name (for
example, parentheses) you must enclose the string in single quotes.
LU 6.2 On OS/390 there are two forms in which to specify the value:
Logical unit name
The logical unit information for the Queue Manager, comprising the
logical unit name, TP name, and optional mode name. This can be
specified in one of 3 forms:
Form: Example
– luname: IGY12355
– luname/TPname: IGY12345/APING
– luname/TPname/modename: IGY12345/APINGD/#INTER
For the first form, the TP name and mode name must be specified for
the TPNAME and MODENAME attributes; otherwise these attributes
must be blank.
Symbolic name
The symbolic destination name for the logical unit information for the
Queue Manager, as defined in the side information data set. The
TPNAME and MODENAME attributes must be blank.
Note: For cluster-receiver channels, the side information is on the
other Queue Managers in the cluster. Alternatively, in this case it can be
a name that a channel auto-definition exit can resolve into the
appropriate logical unit information for the local Queue Manager.
On OS/2 Warp it is the fully-qualified name of the partner LU, or an LU
alias. On OS/400, Windows NT, and UNIX systems, this is the name of
the CPI-C communications side object or, if the TPNAME is not blank,
this is the fully-qualified name of the partner logical unit.
See the information about configuration parameters for an LU 6.2
connection for your platform in the MQSeries Intercommunication
manual for more information.
NetBIOS
A unique NetBIOS name (limited to 16 characters).
SPX
The 4-byte network address, the 6-byte node address, and the 2-byte
socket number. These values must be entered in hexadecimal, with a
period separating the network and node addresses. The socket number
must be enclosed in brackets, for example:
CONNAME(’0a0b0c0d.804abcde23a1(5e86)’).
If the socket number is omitted, the MQSeries default value (X'5e86') is
assumed.
TCP
Either the host name, or the network address of the remote machine
(or the local machine for cluster-receiver channels). This can be
followed by an optional port number, enclosed in parentheses.
This parameter is required for channels with a channel type
(CHLTYPE) of SDR, RQSTR, CLNTCONN, CLUSSDR, and
CLUSRCVR. It is optional for SVR channels, and is not valid for RCVR
or SVRCONN channels.