Filter
Top Products
KLVHS001–KLVSC009 33
KLVNA253 RESOURCE LIST BUILD DISABLED, NOT APF AUTHORIZED
Explanation: An attempt was made (either at initialization or through the NAM
RACLIST command) to build an in-storage profile (for use by your security
system). The attempt failed because the address space is not APF-authorized.
System Action: CT/Engine will use RACHECK macros instead of FRACHECK
to verify security access.
User Response: If you desire in-storage profiles, APF authorize the address
space. If your security system does not provide in-storage profiles, or you have
specified your own security exits in KLVINNAM, you may ignore this message.
Message Type: INFO.
KLVNA254 UNABLE TO CREATE DUMMY ACEE: RC(rc)
Explanation: The NAM RACLIST command was issued to refresh in-storage
profiles, but failed because a dummy ACEE could not be created.
System Action: The command is ignored.
User Response: Use the return code to determine the reason for the
RACROUTE (or possibly RACINIT failure). Refer to IBM’s RACROUTE Macro
Reference (RACROUTE) or Authorized Assembler Programming Reference
(RACINIT) for the meaning of rc.
Message Type: INFO.
KLVNA255 UNABLE TO DELETE DUMMY ACEE: RC(rc)
Explanation: The NAM RACLIST command was issued to refresh in-storage
profiles. The refresh was successful, but the dummy ACEE could not be deleted.
System Action: The ACEE remains active.
User Response: Use the return code to determine the reason for the
RACROUTE (or possibly RACINIT failure). Refer to IBM’s RACROUTE Macro
Reference (RACROUTE) or Authorized Assembler Programming Reference
(RACINIT) for the meaning of rc.
Message Type: INFO.
KLVNA256 REFRESH OF RESOURCE PROFILES COMPLETE
Explanation: The NAM RACLIST command was issued to refresh in-storage
profiles. The refresh was successful.
System Action: None.
User Response: None.
Message Type: INFO.
KLVNT001 "NTD dialog" DIALOG MANAGER INIT FAILED
Explanation: While performing an NTD operator command, CT/Engine could
not initialize the Dialog Manager for the dialog, dialog.
System Action: The NTD command terminates.
User Response: Save the MVS SYSLOG, and the CT/Engine RKLVLOG and
run sheets, then contact Candle Customer Support.
Message Type: ERROR.