Filter
Top Products
KLVHS001–KLVSC009 21
KLVNA006 DATABASE INITIAL LOAD COMPLETE: DSNAME(dsname)
CNTRLPT(cntrlpt)
Explanation: Initialization has completed successfully for the NAM database
dsname in control point cntrlpt.
System Action: None.
User Response: None.
Message Type: INFO.
KLVNA007 DATABASE dsname
INITIAL LOAD mm/dd/yy hh:mm:ss ON smfid
LAST ACCESSED mm/dd/yy hh:mm:ss ON smfid2
Explanation: This message is logged to create an audit trail for each NAM
database dsname specified in member KLVINNAM in the initialization library.
System Action: None.
User Response: None.
Message Type: LOG.
KLVNA008 KLVINNAM RKANPAR PARAMETERS:
Explanation: Module KLVINNAM logs its start-up parameters as they are read
from RKANPAR. This is the header message and will be followed by message
KLVNA002.
System Action: None.
User Response: None.
Message Type: LOG.
KLVNA009 UNABLE TO LOAD USER SECURITY EXIT: EP(member)
Explanation: CT/Engine was unable to LOAD the security exit member chosen
as a security validation option. This message is accompanied by message
KLVCM003, which provides a more specific reason for the error.
System Action: CT/Engine start-up terminates.
User Response: If message KLVCM003 precedes this message, determine the
cause of the error, correct it, and restart CT/Engine. If KLVCM003 does not
precede this message, ensure that the load module exists in the RKANMODL
concatenation and restart CT/Engine.
Message Type: ERROR.
KLVNA010 CONTROLPOINT cntrlpt INITIALIZED
Explanation: NAM control point cntrlpt has been initialized.
System Action: None.
User Response: None.
Message Type: INFO.
KLVNA011 DATABASE INITIALIZATION FAILED: DSNAME(dsname)
CNTRLPT(cntrlpt)
Explanation: An error was encountered during NAM initialization of control
point cntrlpt.
System Action: CT/Engine initialization terminates.
User Response: Make sure that the NAM database is available and is not
allocated by another region.