Filter
Top Products
KLVSD001–KLXOP005 143
If a data item cannot be located, it is omitted from the message. If DEBUG(Y) was
specified in the CT/Engine KLVSYSIN file, the contents of any request units, the
RPL, and a CT/Engine control block will be displayed, if they are relevant.
System Action: The system action depends on the reason for the dump.
User Response: Refer to the IBM manual ACF/VTAM Programming to obtain
information about the FDBK, FDBK2, and OSENS fields. If the dump seems to be
associated with a persistent problem, contact Candle Customer Support.
Note: Many of these dumps are the result of normal conditions, such as
powering a terminal off.
Message Type: LOG. If DEBUG(Y) is specified, LOG, VIEW.
KLVVT021 EXCEPTION RESPONSE
Explanation: An exception response was received by CT/Engine.
System Action: The system action depends on the reason for the exception
response.
User Response: If the exception response is not the result of normal network
activity, contact Candle Customer Support.
Message Type: LOG.
KLVVT021 DEFINITE RESPONSE
Explanation: The EXIT or API traces have been enabled. All responses received
by CT/Engine cause a VTAM request dump under these circumstances.
System Action: None.
User Response: None.
Message Type: LOG.
logmode Associated logmode.
seqno RPL sequence number. [RPLSEQNO].
req Request code. If it is one of a standard set, it is shown in English;
otherwise it is formatted in hexadecimal. [RPLREQ].
mod Control modifier: [RPLSRTYP] and [RPLRH3].
R Response
BB Begin bracket
EB End bracket
CEB Conditional end bracket
CD Change direction
cntrl Control information. If it is one of a standard set, it is shown in
English; otherwise it is formatted in hex. [RPLCNTRL].
fdbk Request feedback. If it is one of a standard set, it is shown in
English; otherwise it is formatted in hex. [RPLFDBK].
fdbk2 More feedback information, displayed in hex. [PRLFDBK2].
osens Sense code information, displayed in hex. [RPLOSENS].