Filter
Top Products
138 Candle Products Messages Manual (KLVHS–KONCT)
KLVVS021 VSAM LOGIC ERROR: RPL(addr) CLUSTER(name) RPLFDBWD(rplfdbwd)
RPLIDWD(rplidwd) RPLOPTCD(rploptcd)
Explanation: A VSAM request issued by CT/Engine received RC=8, indicating
that a logical error occurred. For resource contention errors received for a given
request, this message is issued every 10 errors to reduce message traffic in
RKLVLOG.
System Action: If the error indicates VSAM resource contention, message
KLVVS026 will be issued and the request retried. Otherwise, the system action
depends on the reason for the error.
User Response: When this message is followed by KLVVS026, refer to that
message for appropriate actions. Otherwise, consult the appropriate IBM DFP or
VSAM reference manual (typically Macro Instructions for Data Sets) for the
meaning of RPLFDBWD (the feedback word) to determine the cause of the error,
then take the appropriate corrective action.
Message Type: LOG.
KLVVS026 VSAM type CONTENTION - REQUEST WILL BE RETRIED IN 0.50
SECONDS (nnn RETRIES)
Explanation: A VSAM request issued by CT/Engine was rejected because of
resource contention. type may be CI, BUFFER, or STRING. nnn is the number of
prior retries for this request. KLVVS021 precedes this message. For resource
contention errors received for a given request, this message is issued every 10
errors to reduce message traffic in RKLVLOG.
System Action: The CT/Engine requester is suspended for one-half second,
then the request is reissued.
User Response: If the condition occurs ofter, take the following actions:
Message Type: LOG.
KLVVS031 VSAM PHYSICAL ERROR: RPL(addr) CLUSTER(name)
RPLFDBWD(rplfdbwd) RPLIDWD(rplidwd) RPLOPTCD(rploptcd)
Explanation: A VSAM physical error was detected.
System Action: The system action depends on the reason for the error.
User Response: Consult the appropriate IBM DFP or VSAM reference manual
(typically Macro Instructions for Data Sets) for the meaning of RPLFDBWD (the
feedback word) to determine the cause of the error, then take the appropriate
corrective action.
Message Type: LOG.
STRING Increase the LSRSTRNO value in RKLVIN to allow more
concurrent VSAM requests. If the value is at its maximum of 255,
no further action is available.
BUFFER Increase the LSRPOOL value in RKLVIN for the CI size of the
cluster identified in the KLVVS021 message.
CI If the cluster identified in the KLVVS021 message has a CI size
greater than 4096, reallocate it with CISIZE(4096) and increase
the LSRPOOL value for buffer size 4096. If the CI size is 4096 or
smaller, no further action is available.