Filter
Top Products
244 Candle Products Messages Manual (KLVHS–KONCT)
KMQCI303I MQ MANAGER (manager_name) IN SET(manager_name_mask) IS
MONITORED
Explanation: This message is issued in response to the DISPLAY SETTINGS
command.
System Action: None.
User Response: None. This is an informational message only.
KMQCI304I QUEUE SET(queue_name_mask) TYPES(queue_types) IS ESTABLISHED
Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays information from the previously issued SET QUEUE
command. Queue types can be any combination of the following: PREDEFINED,
PERMDYN, TEMPDYN or ALL.
System Action: None.
User Response: None. This is an informational message only.
KMQCI305I QUEUE SET(queue_name_mask) TYPES(queue_types) IS SUPERSEDED
Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays information from the previously issued SET QUEUE
command. The specified queue_name_mask was superseded by another
queue_name_mask. Queue types can be any combination of the following:
PREDEFINED, PERMDYN, TEMPDYN or ALL.
System Action: This mask is not executed.
User Response: None. This is an informational message only.
KMQCI306I CHANNEL SET(channel_name_mask) IS ESTABLISHED
Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays information from the previously issued SET CHANNEL
command.
System Action: None.
User Response: None. This is an informational message only.
KMQCI307I MSGACCESS(parm) ICYCLE(interval_cycle) HLQ(high_level_qualifier)
Explanation: This message is issued in response to the DISPLAY SETTINGS
command and displays supplemental information from previously issued SET
commands such as SET GROUP, SET MANAGER, or SET RMANAGER.
System Action: None.
User Response: None. This is an informational message only.
KMQCI308I RMANAGER SET(manager_name_mask) IS ESTABLISHED WITH
FOLLOWING SPECIFICATIONS: GROUP(group_name)
EVENTS(REMOVE|BROWSE|NO) ACTIVE(YES|NO)
REMOTEQ(remote_queue_name) AGGRHIST(aggregation_samples)
RETAINHIST(historical_aggregation_value)
Explanation: This message is issued in response to the DISPLAY SETTINGS
command, displays information from the previously issued SET RMANAGER
command, and displays information about remote manager settings.
System Action: None.
User Response: None. This is an informational message only.