Filter
Top Products
348 Candle Products Messages Manual (KLVHS–KONCT)
KN3CV087 TRACE IS NOT ACTIVE
Explanation: The user attempted to stop a trace that was never started.
System Action: None.
User Response: The stop action is only valid for active or wrapped traces.
Message Type: User input error.
KN3CV088 NUMBER EXCEEDS SYSTEM MAX OF nnnnnnn
Explanation: The number of PIUs requested exceeds the maximum allowed
which is set by the administrator on the Global Options panel.
System Action: None.
User Response: Specify a number less then or equal to the allowed maximum.
Message Type: User input error.
KN3CV089 CLOSE FAILED FOR SYSOUT DATASET
Explanation: An internal error was detected while attempting to close the screen
print log and route it for printing.
System Action: Detailed message written to job log.
User Response: Retry the operation. If the problem continues, gather any logs
or dumps produced and contact Candle Support Services.
Message Type: Internal error.
KN3CV090 nn SCREEN(S) ROUTED FOR PRINTING
Explanation: The user closed the screen print log.
System Action: The captured screen prints are routed for printing.
User Response: None.
Message Type: Confirmation.
KN3CV091 NO SCREEN PRINTS WERE REQUESTED
Explanation: The user closed the screen print log, but there were no screens
captured.
System Action: None.
User Response: Use the F11 key to capture screens before closing the screen
print log.
Message Type: Information.
KN3CV092 GET FAILED FOR DEFAULT PRINTER OPTIONS
Explanation: An internal error was detected while closing the screen print log.
System Action: Detailed message written to job log.
User Response: Retry the operation. If the problem continues, gather any logs
or dumps produced and contact Candle Support Services.
Message Type: Internal error.
KN3CV093 CREATE FAILED FOR SCREEN PRINT LOG
Explanation: An internal error was detected while closing the screen print log.
System Action: Detailed message written to job log.
User Response: Retry the operation. If the problem continues, gather any logs
or dumps produced and contact Candle Support Services.
Message Type: Internal error.