Filter
Top Products
5. Front Panel Menu orientation
5.16 Save All
General
Save All on the Se tup menu s aves your custom configuration parameters in non-volatile memor y.
If you sav e the system state, these parameters are restored the next time you power up the E2. If you do not use this function, yo ur
custom settings are not restored during the next system power up sequence.
Saving all modifie d settings
1. Select Save All from the Setup menu.
The following message appears:
Image 5-28
“Saving all” message
2. Wait few seconds ...
Parameters are s aved in non-volatile memory and you are returned to the Setup menu.
66
R5905948 E2 12/12/2014