Filter
Top Products
3. General
3.6 Installation requirements
Environment conditions
Table below summarizes the ph ysical environment in which the E2 may be safely operated o r stored.
Environment Operating Non-Operating
Ambient Temperature 0°C (32°F) to 40°C (104°F) -10°C (14°F) to 60°C (140°F)
Air c leanliness Clean office environment (equivalent with cleanroom
standard ISO 14644-1 ISO Class 9)
n.a.
Humidity
5% to 85% RH Non-condensed 0% to 95% RH Non-Condensed
Altitude
-60 (-197Ft) to 3000m (9843Ft) -60 (-197Ft) to 10000m (32810Ft)
CAUTION: Let the E2 acclimate to the ambient temperature after unpacking. Ensure that the hum idity is within
the specification. Neglecting this may result in startup failure of the device.
E2 software package
This version of the E2 User’s Guide is based on software version 01.00.00.
Verify that the E2 is loaded with the latest software version available on the Barco web site
(URL:h
ttps://www.barco.com/). Re fer to the chapter "Updating firmware", pag e 183 for more information
about the E2 upgrading software.
Event Master Control Software (EMI GUI)
The EM GUI s oftware must be at least:
• Version 01.00.00
R5905948 E2 12/12/2014
23