Filter
Top Products
5. Front Panel Menu orientation
5.5 About Setup menu
General
The Setup menu, shown in the following illustration, is the menu from which you access all operational menus. To display the Setup
menu, press the SEL button on the front panel when the Status menu is dis played, or pres s the ESC button to go back from a
submenu (one level for each time you press the button).
Image 5-7
Setup menu
From the Setup menu, you ca n con figure certain system settings for the E2, display Technical Support contact information, restore
factory default settings, and check for available firmware updates. And finally, you can save all the recent changes to the system.
The following sections describe eac h Setup Menu option in detail, except for the Code Upgrade feature. For details about that
option, refer to the chapter "Updating firmware", page 183:
• "About the System menu", page 52
• "Using the Tech Support menu", page 63
• "Restoring Factory Default Settings", page 64
• "Updating firmware", page 183
• "Save All", page 66
R5905948 E2 12/12/2014
51