Filter
Top Products
7. System Setup
7.22 Programming Menu > Drop Inputs to A ux Destinations
General
In this procedure, you will drop Inputs into Aux Destinations.
Prerequisite
• Ensure that you are familiar with the Programming Menu. For details on this menu, please refer to chapter "Programming
Menu", page 105.
Drop Layers into Screen Destinations
1. On top in the middle of the layout area click on the Aux destination you wish to input .
2. On the left hand side click on the Inputs t ab.
3. Drag the Input or Background into the preview s creen of the Aux destination.
(Optional) Additional Adjustments
Click o n the Adjust tab that is located on the top.
1. Adjust sizing a nd positioning parameters.
2. Adjust Color parameters.
180
R5905948 E2 12/12/2014