Filter
Top Products
4. Hardware orientation
4.4 Dual Link D VI Input Card
General
The Dual Link DVI input card includes two DVI-I dual-link connectors which can support a single o r dual-link DVI video s ignal.
Although the D VI-I connectors includes pins that support analog signals, the DVI card doesn’t support analog
signals. If you need to connect an analog signal to the E2, you need to em ploy an external A/D co nverter.
The figure below illustrates the Dual Link DVI input card’s rear panel connectors:
Image 4-6
Dual Link DVI Input Card Rear Panel
1 DVI-I dual-link connector — DVI 1 with an LED
that turns on green when a valid sync ha s been detected
2 DVI-I dual-link connector — DVI 2 with an L
ED that turns on green when a valid sync ha s been detected
Features
• Default slot(s): 5, 6
• Process up to 2 signals independently
• 2x DVI-I dual-link connector
• Support for single or dual-link DVI video signal
• Each input channel includes an LED that turns green when a valid sync is detected.
R5905948 E2 12/12/2014
37