Filter
Top Products
10. Maintenance
10.34 Top Cover
Image 10-91
Necessary tools
1 x Phillips Screwdriver #2
How to remove Top Cover
1. Remove the 12 screws from the two sides (6 in each side, 4-40x0.25) that are located towards the top side of the unit.
2. Remove the two (2) screws (4-40x0.25) located closer to the rear end of the unit. These are flat head screws.
3. Remove the 8 screws (6-32x0.25) located on the top at the back of the chassis.
4. Remove the cover by gently pulling it away from the E2
Image 10-92
How to install To p Cover
To install the Top Cover follow the same pr ocedure in the reverse order.
274
R5905948 E2 12/12/2014