Filter
Top Products
10. Maintenance
10.26 VFD Cable
Image 10-66
The flat ribbon V F D cable connects the VFD assembly to the System Pow er board. This procedure provides
instructions o n how to disconnect the cable on both sides.
Concerned parts
R767269K
Cable Kit S et
Necessary tools
• 1 x Phillips Screwdriver #2
• Hex Sc re w driver
How to remove the VFD Cable
1. Partially remove the front panel assembly and pull it away to expose the cables behind it (refer to the related procedure).
2. Push out the side latches on VFD connector to release the VFD cable.
Image 10-67
3. Gently push the cable through t
he grommet located in the 1RU tray.
258
R5905948 E2 12/12/2014