Filter
Top Products
10. Maintenance
10.12 Front Panel Knob
Image 10-27
Before you proceed rem oving the Front panel knob you need to remove the Front Cover Assembly as outlined
in the related procedure.
Necessary tools
• Knob removal tool provided by Barco
Image 10-28
• Flat head screwdriver or a tool with a sha rp edge
How to remove the Front Panel Knob
1. Remove the knob cover with a flat screw driver or a sharp object to expose the inside of the knob.
Image 10-29
2. Use the knob removal tool provided by Barco to take out the knob. Align the notches on the tool with the grooves in the knob as
indicated below.
Note: If the tool is not available use fine point needle nose pliers to squeeze at knob between the two grooves while pulling it
out.
230
R5905948 E2 12/12/2014