Filter
Top Products
8. Updating firmware
8.2 Upgrading fi rmware using the web Upgrade
The upgrade operation begins with a s tep of validation to check if a new version is available.
How to upgrading firmware
1. Verify that the E2 has internet access. Contact your system administrator if necessary.
2. Select Set up > Firmware Upgrade > Web Upgrade. The submenu shown in the following illustration appears.
Image 8-4
Web Firmware Upgrade Submenu
3. Select Check.
A message informs you if a new firmw a re versio n is available.
Image 8-5
Firmware Version-Upgrade M essage
Or,
If during the “Check” process new firmware is NOT detected, the follow
ing message will show:
Image 8-6
No Firmware Available Message
4. Press SEL to start the upgrade. A message will inform the user to “Please wait...”
Image 8-7
Upgrade Wait Message
5. After the upgrade is finished, the E2 will automatically reboot.
186
R5905948 E2 12/12/2014