Filter
Top Products
5. Front Panel Menu orientation
5.14 Restoring Factory Default Settings
General
As show n in the following illustration, two options in the Setup Menu allow y ou to restore the E2 to its factory default condition.
Image 5-27
The following attributes con stitute a factory default condition:
•TheStatus M enu is shown in the display screen.
• All custom confi gura tions are deleted.
The Factory Reset Menu provides two options for restoring factory default settings:
• Factory Reset — If you use this option, all of your system configuration are deleted. Settings will be restored to the original
factory defaults.
• Factory R eset, Save IP — This option performs a factory reset, but retains the IP address of the E2.
It is advisable to clear all s aved configu rations when you use the E2 for the first time, or when return ing an
E2 from an event.
Restoring all factory settings
To restore all default settings to the E2, use the following procedure:
1. Select Factory Reset from the Setup Menu.
The Factory Reset Menu appears.
2. Select Factory Reset.
A prompt appear s, asking if you want to clear all configurations.
3. Press SEL.
The system turns off, then reboots.
If yo u pre ss ESC to cancel the operation instead, your custom setti
ngs remain in place and you are returned to the Factory
Reset Menu.
Retaining the IP address when restoring factory settings
To restore default settings to the E2 but retain the unit’s IP a ddress, use the following procedure:
1. Select Factory Reset from the Setup Menu.
The Factory Reset Menu appears.
2. Select Factory Reset, Save IP.
A prompt appear s, asking if you want to clear all configurations.
3. Press SEL to reset the system but save the IP address.
The system turns off, then reboots.
If yo u pre ss ESC to cancel the operation instead, your custom settings remain in plac e and you are returned to the Factory
Reset Menu.
64
R5905948 E2 12/12/2014