Filter
Top Products
9. General operation example
Image 9-14
P2: You can skip this step if you don’t want thumbnail images to represent the inputs/sources. In this case,
the layers i n the de stinations area will be black an d noted only by the assigned name.
P2: Select thumbnails for I nputs
1. From the left hand side, click on the Input tab.
2. Next to the Refresh All Thumbnails click on the thumbnail button.
3. Click in the black box and navigate the compu ter to find and select the desired pic.
4. After a pic is selected, the ima ge will fill the black square.
5. Repeat this sequence until a pic is selected for each input.
6. When these steps are completed, the section will appear as follows.
200
R5905948 E2 12/12/2014