Filter
Top Products
10. Maintenance
Image 10-58
3. Gently p ull the Genlock as sem bly a way from the un
it . Don’t pull the assembly too far back because there are still 2 ca bles
attached.
Note: At this point there are still 2 cables connecting the G enloc k Assembly to the unit.
4. Unlatch the VFD ribbon cab le f rom the connector a nd pull it up and away from the Genlock board.
Note: This cable conne cts the Genlock board to the Sy stem-Power board.
Image 10-59
5. Unlatch the Ethernet cable from the connector and pull back and away from the Genlock board.
Note: This cable conne cts the Genlock board to the Sy stem-Power board.
R5905948 E2 12/12/2014
251