Filter
Top Products
337
Menus/Tools
■ Sew Setting Stage
In the Sew Setting Stage, outline pattern from the Figure Handle Stage are assigned line and region sewing
attributes. This is done by using the Tool Box and the Sewing Attributes bar.
Selecting a button on the Tool Box changes the pointer mode and shape. A description of each tool appears
at the left side of the status bar.
Tool Box Purpose Reference
Sets the pointer in region sewing mode.
When you start up the application, this tool is selected.
Pointer shape:
p. 209
Sets the pointer in line (all) sewing mode.
Pointer shape:
p. 211
Sets the pointer in line (part) sewing mode.
Pointer shape:
p. 211
Sets the pointer in hole sewing mode.
Pointer shape:
p. 227
Sets the pointer in zoom-in mode.
Pointer shape:
Maximizes the selected Design Page to fit in the window.
Sets the pointer in zoom-out mode.
Pointer shape:
Sets the pointer in stamp input mode.
Pointer shape:
p. 228
Sets the pointer in stamp edit mode.
Pointer shape:
p. 229