Filter
Top Products
98
Arranging Embroidery Designs (Layout & Editing)
3. Click a design to select it.
4. Click Import, or double-click the design to
import it.
Importing embroidery
designs from Design Center
An embroidery design in Design Center can be
imported directly into the Design Page.
Toolbar button:
1. Start up Design Center and open the file that
you want to import into Layout & Editing.
2. Click , or click File, then Import, then
from Design Center.
→ The Import size dialog box appears.
3. In the Magnification box, type or select the
magnification factor.
4. Under Orientation, select the desired
orientation.
5. Click Import to import the embroidery design.
c
“Manually Creating Embroidery Patterns
From Images (Design Center)” on
page 193
b Memo:
• To see a more detailed design, select a
design, and then click
Preview
. A
Preview
dialog box similar to the one shown below
appears.
• To import the displayed design, click
Import
.
• To return to the
Browse
dialog box,
click
Cancel
.
• To quit the operation, click
Cancel
.
b Memo:
When importing some designs, the
Select
Import size
dialog box appears. If this
happens, select the desired import size, and
then click
OK
to import the design.
a Note:
Due to copyright issues, some embroidery
cards cannot be used with this function.
a Note:
• The embroidery design cannot be
magnified to a size larger than the Design
Page.
• The magnification factor cannot be set
below 25%.
b Memo:
• To quit the operation and close the dialog
box, click
Cancel
.
• If Design Center has not been started up, if
a .pem file has not been opened or if Design
Center is not in the Sew Setting Stage, one
of the following messages appear.
Click
OK
, and then start up Design Center
and open a .pem file.