Filter
Top Products
228
Manually Creating Embroidery Patterns From Images (Design Center)
Applying and editing
stamps
Stamps created with Programmable Stitch Creator
can be applied to regions in the Sew Setting Stage
of Design Center. Some stamp patterns are
provided with this application; however, by using
Programmable Stitch Creator, you can edit the
patterns that are provided or you can create your
own.
■ Applying a stamp
1. Click on the Tool Box.
→ The shape of the pointer changes to
, and the Stamp Attribute Setting
dialog box appears.
2. In the dialog box, select a stamp pattern.
3.
To change the width and height of the stamp,
type or select the desired size (1.0 to 100.0 mm
(0.04 to 3.94 inches.)) under
Size
in the
Stamp
Attribute Setting
dialog box.
4. To change the orientation of the stamp, move
the pointer over the red arrow inside of the
circle under Direction, and then drag the red
arrow to the desired angle.
5. Click the region where you want to apply the
stamp to select it.
→ “Marching lines” appear around the
selected region, and the shape of the
pointer changes to whenever it is
moved over the selected region.
b Memo:
The path to the currently selected folder
appears to the right of in the dialog box.
b Memo:
• Engraving and embossing stamp settings
appear as red- and blue-filled areas.
• To select a different folder, click .
In the
Browse for Folder
dialog box that
appeared, select the desired folder, and
then click
OK
(or double-click the folder) to
close the
Browse for Folder
dialog box
and display the stamp patterns from the
selected folder in the preview window.
b Memo:
• The dialog box remains displayed so that
the size and orientation of the stamp can be
adjusted at any time.
• To close the dialog box, click
Close
.
• To open the dialog box again after closing it,
click .