Filter
Top Products
144
Arranging Embroidery Designs (Layout & Editing)
Applying and Editing Stamps
Stamps can be applied to regions of objects drawn with the Circle or Arc tool, Rectangle tool, Outline tools,
Text tools and the Manual Punch tools. Some stamp patterns are provided with this application; however, by
using Programmable Stitch Creator, you can edit the patterns that are provided or you can create your own.
Applying a stamp
1. Click on the Tool Box.
→ Two buttons appear: .
2. Click .
→ The shape of the pointer changes to
, and the Stamp Attribute Setting
dialog box appears.
3. In the dialog box, select a stamp pattern (.pas
file with stamp settings applied).
4. To change the width and height of the stamp,
type or select the desired size (1 to 100 mm
(0.04 to 3.94 inches)) under Size in the Stamp
Attribute Setting dialog box.
5. To change the orientation of the stamp, move
the pointer over the red arrow inside of the
circle under Direction, and then drag the red
arrow to the desired angle.
6. Click the object where you want to apply the
stamp to select it.
→ “Marching lines” appear around the
selected object, and the shape of the
pointer changes to whenever it is
moved over the selected object.
b Memo:
The path to the currently selected folder
appears to the right of in the dialog box.
b Memo:
• Engraving and embossing stamp settings
appear as red- and blue-filled areas.
• .pas files with no stamp settings are also listed.
• To select a different folder, click .
In the
Browse for Folder
dialog box that
appeared, select the desired folder, and
then click
OK
(or double-click the folder) to
close the
Browse for Folder
dialog box
and display the stamp patterns from the
selected folder in the preview window.
b Memo:
• The dialog box remains displayed so that
the size and orientation of the stamp can be
adjusted at any time.
• To close the dialog box, click
Close
.
• To open the dialog box again after closing it,
click .