Filter
Top Products
232
Manually Creating Embroidery Patterns From Images (Design Center)
→ A preview of the embroidery pattern
appears.
2. To leave the preview display, repeat step 1.,
or press the key.
3. To display a realistic preview of the
embroidery pattern, click Display on the menu
bar, and then click Realistic Preview.
An alternate method is to click the Toolbar
button indicated below.
→ A realistic preview of the embroidery
pattern appears.
4. To leave the realistic preview display, repeat
step
3., or press the key.
■ Changing realistic preview
settings
You can change the realistic preview settings to
better view the embroidery pattern. (This function is
available only in the Sew Setting Stage.)
1. Click Display, then Realistic Preview
Attribute Setting.
→ A Realistic Preview Attribute dialog box
similar to the ones shown below appears.
2. Use the Thread Width slider to set how wide
the thread will appear.
3. Use the Contrast slider to set the contrast.
4. Use the Brightness slider to set how bright
the display is.
5. Click Apply to display a realistic preview of the
patterns with the new settings (when the
realistic preview is displayed).
Or, click OK to save the settings for the next
time that the Realistic Preview function is
select (when the realistic preview is not
displayed).
c
“Displaying a preview of the embroidery”
on page 231
b Memo:
To zoom in (or out), click (or ) on the
Tool Box, and then click the desired area of
the embroidery pattern.
a Note:
The embroidery pattern cannot be edited
while the preview is displayed.
b Memo:
To zoom in (or out), click (or ) on the
Tool Box, and then click the desired area of
the embroidery pattern.
Esc
Realistic Preview
a Note:
• The embroidery pattern cannot be edited
while the realistic preview is displayed.
• The Realistic Preview function cannot
display a clean preview of the pattern if the
monitor is set to 256 colors or less. The
monitor should be set to at least 16-bit
High Color (65536 colors).
b Memo:
To close the dialog box without applying the
changes to the settings, click
Close
or
Cancel
.
Esc