Filter
Top Products
310
Tutorial (Advanced)
Move the pointer along the bottom edge of the
work area, and then double-click the lower-
right corner to draw a line along the bottom
edge of the work area.
Apply the embossing/engraving effects.
Click (Region (engrave)) .
Click the first and fourth wave regions.
→ These regions appear in red and will be
sewn with short stitches to give the effect
of engraving.
Click (Region (emboss)).
Click the second and fifth wave regions.
→ This region appears in blue and will be
sewn with no dropped stitches to give the
effect of embossing.
2