Filter
Top Products
263
Creating Custom Stitch Patterns (Programmable Stitch Creator)
2. Drag the handle to adjust the selected
pattern(s) to the desired size.
Deleting patterns
1. Select the pattern to be deleted.
2. Press the key, or click Edit, then
Delete.
Cutting out patterns
Selected pattern(s) can be removed from the screen
while saving a copy in the Clipboard.
Toolbar button:
1. Select one or more patterns.
2. Click , or click Edit, then Cut.
→ The selected patterns are removed from
the work area.
c
“Copying patterns” on this page, “Pasting
a cut or copied pattern” on this page and
“Deleting patterns” on this page
Copying patterns
Selected pattern(s) can be saved on the Clipboard
without being removed from the work area.
Toolbar button:
1. Select one or more patterns.
2. Click , or click Edit, then Copy.
→ The selected patterns are copied onto the
Clipboard and are ready to be pasted.
c
“Cutting out patterns” on this page,
“Duplicating patterns” on this page and
“Pasting a cut or copied pattern” on this
page
Duplicating patterns
A copy of the selected pattern(s) can be added to
the work area.
1. Select one or more patterns.
2. Click Edit, then Duplicate.
→ A copy of the pattern(s) are added to the
work area.
c
“Copying patterns” on this page and
“Pasting a cut or copied pattern” on this
page
Pasting a cut or copied
pattern
The patterns on the Clipboard can be pasted into
the work area.
Toolbar button:
1. Click , or click Edit, then Paste.
→ The patterns saved on the Clipboard
(using the Cut or Copy command) are
pasted into the work area.
c
“Cutting out patterns” on this page,
“Copying patterns” on this page and
“Deleting patterns” on this page
b Memo:
• is for scaling the width.
• is for scaling the height.
• and are for scaling both
dimensions at the same time. (The height-
to-width proportion is maintained.)
• If the key is held down while a handle
is dragged, the image is enlarged or
reduced from the center of the image.
b Memo:
Since the removed patterns are saved on the
Clipboard, you can paste them back using the
menu command
Edit
–
Paste
.
Shift
Delete