Filter
Top Products
Teledyne API – Model T300/T300M CO Analyzer Getting Started
85
3.4.4.3. O2 SENSOR CALIBRATION PROCEDURE
If your T300/T300M is equipped with the optional O
2
sensor, this sensor should be
calibrated during installation of the instrument. See Section 9.7.1 for instructions.
3.4.4.4. CO2 SENSOR CALIBRATION PROCEDURE
If your T3
00/T300M is equipped with the optional CO
2
sensor, this sensor should be
calibrated during installation of the instrument. See Section 9.7.2 for instructions.
Note Once
you have completed the above set-up procedures, please fill out
the Quality Questionnaire that was shipped with your unit and return it
to Teledyne API. This information is vital to our efforts in continuously
improving our service and our products. THANK YOU.
06864B DCN6314