Filter
Top Products
Teledyne API – Model T300/T300M CO Analyzer Communications Setup and Operation
145
Communication Modes for each COM port must be configured independently. To turn
on or off the communication modes for either COM1 or COM2, access the
SETUP>MORE>[COM1 or COM2] menu and at the COM1[2] Mode menu press EDIT.
Continue pressing NEXT to scroll through the
available Modes and press the ON or OFF button
to enable or disable each mode.
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2 EXIT
SETUP X.X COM1 MODE: 32
SET> EDIT EXIT
SETUP X.X COM1 QUIET MODE: OFF
NEXT OFF ENTR EXIT
Select which COM
port to configure
The sum of the mode
IDs of the selected
modes is displayed
here
Figure 6-1: COM1[2] – Communication Modes Setup
06864B DCN6314