Filter
Top Products
APPENDIX A-1: Software Menu Trees, Revision L.8 Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)
A-4
SETUP
PASS
DAS RNGE
CLK
MOREACAL
1
CFG
SAMPLE
1
ACAL menu only appear if analyzer is equipped with
Zero/Span or IZS valve options.
2
Editing an existing DAS channel will erase any
data stored on the channel
options.
3
Changing the event for an existing DAS channel
DOES NOT erase the data stored on the
channel.
EDITVIEW
PREV NEXT
CONC
CALDAT
PNUMTC
STBSPN
STBZRO
Selects the data point to be viewed
Cycles through
parameters assigned
to this iDAS channel
<PRM
PRM>NX10NEXTPREVPV10
EDIT
2
PRNTDELINSNEXTPREV
ENTER PASSWORD: 818
NO
NX10NEXTSET><SET
YES
NAME
EVENT
PARAMETERS
NUMBER OF RECORDS
REPORT PERIOD
RS-232 REPORT
CAL MODE
CHANNEL ENABLE
ON
OFF
NO
YES
2
Sets the maximum number of
records recorded by this channel
Sets the time lapse between each
report
Create/edit the name of the channel
PREV NEXT
Cycles through list
of available trigger
events
3
NOYES
2
EDIT
2
PRNTDELINSNEXTPREV
NO
PRNTEDITSET><SET
YES
Cycles through list of
currently active
parameters for this
channel
MAXMINAVGINST
PRECISIONSAMPLE MODEPARAMETER
Cycles through list of available &
currently active parameters for this
channel
NEXTPREV
TEMP
VIEW
CONC
CALDAT
PNUMTC
STBSPN
STBZRO
TEMP
Figure A-3: Primary Setup Menu
DAS Submenu
06864B DCN6314