Filter
Top Products
Teledyne API – Model T300/T300M CO Analyzer Specifications and Approvals
33
Table 2-3: CO
2
Sensor Option Specifications
2.2. EPA EQUIVALENCY DESIGNATION
Note
T300M: EPA equivalency does not apply to this model.
Teledyne API’s Model T300, Carbon Monoxide Analyzer, is designated as Reference
Method Number RFCA-1093-093 as defined in 40 CFR Part 53, when operated under
the following conditions:
Range: Any range from 10 ppm to 50 ppm
Ambient temperature range of 10 to 40C
Sample filter: Equipped with 5-micron PTFE filter element in the internal filter
assembly
Software settings:
Dilution factor 1.0
AutoCal ON or OFF
Dynamic Zero ON or OFF
Dynamic Span OFF
Dual Range ON or OFF
Auto Range ON or OFF
Temp/Pres Compensation ON
Parameter Description
Ranges 0-1% to 0-20% user selectable. Dual ranges and auto-ranging supported.
Zero Noise
1
<0.02% CO
2
Lower Detectable Limit
2
<0.04% CO
2
Zero Drift (24 hours) <± 0.02% CO
2
Zero Drift (7 days) <± 0.05% CO
2
Span Noise
1
<± 0.1% CO
2
Span Drift (7 days) <± 0.1% CO
2
Accuracy <± (0.02% CO
2
+ 2% of reading)
Linearity <± 0.1% CO
2
Temperature Coefficient <± 0.01% CO
2
/°C
Rise and Fall Time <60 seconds to 95%
1
As defined by the USEPA
2
Defined as twice the zero noise level by the USEPA
06864B DCN6314