Filter
Top Products
Calibration Procedures Teledyne API – Model T300/T300M CO Analyzer
222
9.6.3. FLOW CALIBRATION
The flow calibration allows the user to adjust the values of the sample flow rates as they
are displayed on the front panel and reported through COMM ports to match the actual
flow rate measured at the sample inlet. This does not change the hardware measurement
of the flow sensors, only the software-calculated values.
To carry out this adjustment, connect an external, sufficiently accurate flow meter to the
sample inlet (see Section 11.3.4 for more details). Once the flow meter is attached and
is m
easuring actual gas flow, press:
See also Section
5.9.7.
06864B DCN6314