Filter
Top Products
Reference Manual
300530EN, Rev BA
September 2012
Rosemount 2410
6-4
Section 6. Service and Troubleshooting
6.2.3 Device Live List The 2410 Hub Device Live List lets you view devices connected to the
Tankbus. You can, for example, see the Device Id, Tag, and whether the
devices are configured or not.
The Device Live List is useful when you are going to configure devices in a
Raptor system, in order to verify that the required devices are connected to
the Tankbus.
To view the Device Live List:
1. Start the TankMaster WinSetup program.
2. Select the Rosemount 2410 icon in the TankMaster WinSetup
workspace.
3. Click the right mouse button and choose the Live List option.
Figure 6-1. The 2410 Tank Hub
Device Live List window shows
devices connected to the
tankbus
The 2410 Tank Hub Device Live List window shows the following information:
Table 6-1. Device Live List
description
Item Description
Device Type Examples of supported devices: Rosemount 5900S, 2410,
2240S, 2230, 5300, 5400, 848T, and 3051S.
For unknown devices the device type number is shown.
Device ID (Unit ID) A.unique code that identifies a particular device. You can
choose to view the device ID in decimal or hex format
depending on what format is supported by the device.
Manufact Id Identifes the manufacturer.
Device No Index used to identify devices by the FF stack.
FF Address F
OUNDATION Fieldbus address used for communication on the
Tankbus.
Handled Bit 0 of the Live List Status input register which indicates the
current Tankbus communication status of the device.
Connected “No” means that the device has been disconnected from the
Tankbus.
Configured “Yes” indicates that the device is configured in the 2410 tank
database, i.e. the device is mapped to a particular tank.
Opened Bit 1 of the Live List Status input register which indicates the
current Tankbus communication status of the device.
Auto Mode “Yes” in normal operation. “No” indicates that the device is in
Out of Service mode.
Tag A removable tag provided with the device lets you identify the
device to a physical location.