Reference Manual
300530EN, Rev BA
September 2012
Rosemount 2410
3-12
Section 3. Installation
Tankbus Segment Coupler
In case “daisy-chain” connection is not suitable, a Tankbus Segment
Coupler
(1)
can be used to connect the various devices to the Raptor Tankbus.
Features:
• Entity and FISCO compliant
• adjustable short-circuit limit
• robust die-cast aluminium housing
• protection degree IP67
• integrated bus terminating resistor (switch integrated inside the
housing)
• cable shielding: capacitive or direct connection to housing potential
selectable via switch
NOTE!
Sufficient equipotential bonding of the installation must be ensured. The
device is connected via the bolt on the housing to the system’s potentializer.
Figure 3-4. Dimensions (mm)
(1) Part no. 6853511-493. Contact Emerson Process Management/Rosemount Tank Gauging
for more information.
122
64
36
45
173.5
185.5
207