Filter
Top Products
Reference Manual
300530EN, Rev BA
September 2012
A-3
Rosemount 2410
Appendix A. Reference Data
Mechanical
Housing material Polyurethane-covered die-cast aluminum
Installation Can be installed on a 33.4-60.3 mm (1-2 in.) diameter pipe or wall
Dimensions See “Dimensional drawings” on page A-4.
Weight 4.7 kg (10.4 lbs)
Environment
Ambient temperature -40 to 70 °C (-40 to 158 °F). Minimum start-up temperature is -50 °C (-58 °F).
With LCD display: -25 to 70 °C (-13 to 158
°F)
Storage temperature -50 to 85 °C (-58 to 185 °F)
With LCD display: -40 to 85 °C (-40 to 185
°F)
Humidity 0 - 100% relative humidity
Ingress protection IP 66 and IP 67 (Nema 4X)
Metrology sealing possibility Yes
Write protect switch Yes
Transient / built-in lightning protection According to IEC 61000-4-5, level 4 kV line to ground. Complies with IEEE 587 Category B
transient protection and IEEE 472 surge protection
(1) One Rosemount 5900S with 2-in-1 solution or maximum two Rosemount 5900S gauges installed on separate tanks can be connected to one tank hub.
If two Rosemount 5900S gauges are installed on the same tank, two separate tank hubs are required.
(2) Not available with SIL option.
(3) Can not be combined with a secondary fieldbus.
(4) HCF registration is pending.
(5) Density, mass, and more volume parameters are calculated in Rosemount TankMaster (GOV, GSV, NSV, WIA/WIV).