Filter
Top Products
Reference Manual
300530EN, Rev BA
September 2012
6-3
Rosemount 2410
Section 6. Service and Troubleshooting
4. Choose Predefined for a basic selection of registers. Choose the All
option if you would like to view a range of registers by your own choice.
For the All option, specify a range of registers by setting a start value in
the Start Register input field, and the total number of registers to be
displayed in the Number of Registers field (1-500). Up to 50 registers is
recommended for a quick update of the list.
5. Click the Read button to update the View Input/Holding Registers
window with fresh device data.
6.2.2 Editing Holding
Registers
Most Holding Registers can be edited simply by typing a new value in the
appropriate Value input field. Some Holding Registers (marked grey in the
Value column) can be edited in a separate window. In this case you can
choose from a list of options or you can change separate data bits.
For more information see the Rosemount Raptor System Configuration
Manual (document no. 300510EN).
Predefined
All