Filter
Top Products
Reference Manual
300530EN, Rev BA
September 2012
Rosemount 2410
6-2
Section 6. Service and Troubleshooting
6.2 SERVICE This section briefly describes functions which may be useful for service and
maintenance of a Rosemount 2410 Tank Hub. If not otherwise stated, most
examples are based on using the TankMaster WinSetup tool to access these
functions. See the Raptor System Configuration Manual (Document No.
300510EN) for more information on how to use the TankMaster WinSetup
program.
6.2.1 Viewing Input and Holding Registers
Measured data is continuously stored in input registers of the Rosemount
2410 Tank Hub. By viewing the Input registers you can check that the device
is working properly.
The holding registers store various parameters which are used to configure
the 2410 for various applications.
By using the Rosemount TankMaster WinSetup program, holding registers
can be edited simply by typing a new value in the appropriate value input field.
Some holding registers can be edited in a separate window. In this case
individual data bits can be changed.
To view Input or Holding registers of a 2410 do the following:
1. Start the TankMaster WinSetup program.
2. In the TankMaster WinSetup workspace window, click the right mouse
button on the Rosemount 2410 Tank Hub device icon.
3. Choose the View Input Registers or View Holding Registers option, or
from the Service menu choose Devices>View Input Registers / View
Holding Registers.