Filter
Top Products
Reference Manual
300530EN, Rev BA
September 2012
C-5
Rosemount 2410
Appendix C. Advanced Configuration
C.4 SECONDARY BUS The Rosemount 2410 Secondary Bus is used for communication with
emulated devices. It supports protocols such as the TRL2 Modbus, Enraf,
Varec, L&J, and Profibus. To open the Secondary Bus window:
1. In the WinSetup workspace click the right mouse button on the 2410 icon
2. Choose the Properties option.
3. In the 2410 Tank Hub window select the Configuration tab.
4. Click the Secondary Bus button.
Figure C-3. Secondary Bus
Configuration window
The Secondary Bus Configuration window allows you to change protocol,
baudrate, adress, and other communication settings.