Filter
Top Products
Reference Manual
300530EN, Rev BA
September 2012
3-3
Rosemount 2410
Section 3. Installation
3.3 MECHANICAL
INSTALLATION
The Rosemount 2410 is designed for mounting on a pipe stand or on a wall.
NOTE!
Ensure that the 2410 is installed to minimize vibration and mechanical shock.
3.3.1 Pipe Mounting
1. Attach the bracket to the pipe.
2. Ensure that the 2410 is placed in a
direction so that the display is clearly
visible and wiring can be properly
connected.
3. Tighten the nuts. Use moderate torque
to ensure that the bracket does not
break.
4. Attach the 2410 to the bracket by sliding
it from the top downwards.
5. Secure the 2410 to the bracket by
tightening the screw.
Bracket
4 nuts and
washers
1 - 2 inches
Bracket