Polycom DOC2091A Water System User Manual


 
79
Chapter 5 Provisioning
Provisioning Congurations
Global Management System User’s Guide
Adding a profile
Figure 5.3 Provisioning > Provisioning Congurations > Add conguration prole
1. Click on Add, the Add Conguration Prole window will pop up.
2. Choose the Device type from the drop down menu.
3. Enter a prole Name to identify the prole.
If based on an existing prole, check this box and choose the base prole from the drop
down menu.
4. Click on Continue, the Add Prole window will open.
NOTE
Proles can be based on other proles. A base prole is a template containing settings that
are global for endpoints in an enterprise. Base proles eliminate the need to congure the
same settings every single time.