Polycom DOC2091A Water System User Manual


 
15Chapter 1 Getting StartedGlobal Management System User’s Guide
Licensing Information
Click Generate after entering each license number. When applying the congurator key codes
into Global Management system, use the last key code generated because this will contain the
cumulative number of seats for this serial number.
Applying the key code in Global Management System
When adding additional licenses and no installation is involved, the key code can be applied
by logging into Global Management System and navigating to the Conguration > License
Authentication screen.
Upon entering the key, the information for the license capacity should reect the actual number
of seats registered.
Figure 1.8 Configuration > License Authentication