Filter
Top Products
137Appendix
Appendix
Global Management System User’s Guide
System Information Window - iPower
Call Status Tab
This table displays the following Call Status information for the selected iPower. On this screen
you will nd detailed information regarding the video call. All calls are represented by a single
ball, regardless of the number of channels used. When the call status ball is green, that system
is in a call and all the data shown in this window is current for that system. If the call status ball
is gray, the data shown represents information for that last incoming or outgoing call.
ISDN voice and VoIP call info is not supported here.
Field Description
State Current state of the call. “Call Cleared” means last call
ended normally. “Call disconnected” means last call
ended abnormally. “Call failed” means last call did not
connect.
Call ID The phone number of the system that iPower is
connected to at this moment
Rate Rate at which the current call is made
H.320 calls placed Number of H.320 calls placed since system
installation, including failed calls.
H.320 calls received Number of H.320 calls received since system
installation, including failed calls.
H.323 calls placed Number of H.323 calls placed since system
installation, including failed calls and VoIP calls.
Voice calls placed Number of ISDN voice calls placed since system
installation, including failed calls.
Voice calls received Number of ISDN voice calls received since system
installation, including failed calls.
Time in calls Time in H.320, H.323, and VoIP calls since system
installation
Time in voice calls Time in ISDN voice calls since system installation
Time in calls since restart Time in H.320, H.323, and VoIP calls since system
restart
Time in voice calls since
restart
Time in ISDN voice calls since system restart
Uptime since restart Time system has been up since restart