56Chapter 3 Global DirectoryGlobal Management System User’s Guide
Global Directory Conguration
Conguring your Server to Allow Updates to the Active Directory Schema
1. Open a DOS command prompt.
2. Run command: “regsvr32 c:\winnt\system32\schmmgmt.dll”. If successful a window will
appear and state Dll Register Server Succeeded.
3. From the Start Menu:
Select Run and type the following command line: “mmc /a” and the Microsoft Management
Console window will open up.
4. From the console drop down menu: select Add/Remove Snap in. A new window will open
up.
5. In Add/Remove Snap-in window:
6. Click on Add and select “Active Directory schema” from list.
7. Click on Add then click Close.
8. Close “Add/Remove Snap-in” window by clicking on OK.
9. From the console window:
Select Active Directory Schema in the left pane within the console
10. In this window:
11. Select Operations Master from the action pull down menu.
12. Change Schema Master window opens up. Make sure that the “Schema may be modied
on this Domain Controller” is checked.
13. Select OK and close window.